OS GSO BS 4660:2024
BS 4660:2022
Omani Standard
Current Edition
·
Approved on
14 October 2024
Thermoplastics ancillary fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage. Specification
OS GSO BS 4660:2024 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
OS GSO BS 4660:2024 Scope
This British Standard specifies requirements for ancillary fittings of nominal sizes 110 and 160 installed underground in non‑pressure drainage and sewerage systems, manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE) and intended for use for:
- a) non‑pressure underground drainage and sewerage outside the building structure (application area code “U”); and
- b) non‑pressure underground drainage and sewerage both buried in ground within the building structure (application area code “D”) and outside the building structure.
NOTE This is reflected in the marking of products by “U” and “UD”.
This British Standard also covers the jointing of the ancillary fittings to the pipework system.
The ancillary fittings, which are designed to be buried in the ground, can be installed to a maximum depth of 6.0 m from the ground level (with the exception of gullies and channel fittings) and are intended for use in pedestrian and vehicular trafficked areas.
The ancillary fittings covered in this British Standard are:
- 1) adaptors;
- 2) adjustable fittings;
- 3) gullies (only intended for installation at ground level); and
- 4) channel fittings (only intended for installation within a manhole or inspection chamber).
NOTE 1 Attention is drawn to the ancillary fittings (access fittings and rodding points) specified in BS EN 13598‑1.
NOTE 2 Pedestrian and vehicular trafficked areas are as defined in BS EN 124‑1 and BS EN 1253‑1.
Ancillary fittings conforming to this British Standard also conform to the general requirements in BS EN 476.
NOTE 3 Products conforming to this British Standard can be used with pipes, fittings and other components conforming to any of the plastics product standards listed in Clause 2, providing their dimensions are compatible.
NOTE 4 Products conforming to this British Standard can be installed in underground applications without additional static calculation.
Best Sellers From Chemical and Textile Sector
OS GSO 1943:2024
GSO 1943:2024
Omani Standard
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 1943:2024
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 2528:2024
Gulf Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
OS GSO 2528:2024
GSO 2528:2024
Omani Standard
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
Recently Published from Chemical and Textile Sector
GSO ASTM E2752:2026
ASTM E2752:25
Gulf Standard
Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
OS GSO EN 16274:2026
EN 16274:2021
Omani Standard
Method for analysis of allergens - Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry
OS GSO 2815:2026
GSO 2815:2026
Omani Standard
Cosmetic products – Guidelines on labeling requirements of fragrance allergens
OS GSO ASTM E2752:2026
ASTM E2752:25
Omani Standard
Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products